Filter By:
- Show More Brands
- Show Fewer Brands
Mountain Bars
$145.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package.
- Unidirectional carbon fiber construction
- 35mm stem clamp
- 8 degrees of backsweep with 5 degrees of upsweep
- Trimmable ends, made easy with graphic markings
- Rated to ASTM Condition 4 for extreme off-road riding
$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
Features
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy
- Material: MGR Super 6 Alloy
- Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm)
- Sweep: 4° up x 8° back
- Finish: Shot peen anodized, decal logos
$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it.
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- 35mm bar diameter for incredible strength/weight ratio
$32.95
With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build.
- Material: 6061 alloy
- Width: 670mm
- Rise: 30mm
- Backsweep: 9°
- Upsweep: 2°
- Clamp diameter: 25.4mm
- Bar-end compatible: yes
- Weight: 399g
$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Material: Al-7050
- Width: 800mm
- Backsweep: 9-degrees
- Rise: 25mm
- Upsweep: 5-degrees
- Colors: Black
$34.95
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist.
- Gentle sweep for ergonomic performance
- Bar Clamp Diameter: 31.8mm
- Width: 740mm
- Back Sweep: 9 degrees
- Weight: 380g
- Material: Alloy
$199.95
The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage.
- Material: carbon fiber
- Width: 780mm (cutting not recommended)
- Rise: 15mm
- Backsweep: 9°
- Upsweep: 3°
- Clamp diameter: 31.8mm
- Bar-end compatible: no
- Weight: 175g
- Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing)
- For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.
$89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it?
- Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform
- Requires 35mm bar clamp diameter stem
- Full 800mm width that can be trimmed down to a minimum 750mm
- 8 degree rearward sweep, 5 degree upward sweep
$19.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep
$179.99
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world.
SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance.
- SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight
- Minimum bar width of 28" or 710mm at indicated cut marks
- Reinforced clamping zones for lock-on grip
- Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface.
- Upsweep: 5°
- Backsweep: 9° (760mm bars)
- Backsweep: 7° (all other bars)
$79.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm.
- Cost-effective upgrade to your cockpit without sacrificing quality
- Shot-peening and anodizing enhances fatigue life
- Length: 800mm
- Dial your fit—adjustable to 740mm
- Choose 25/40
- 35mm clamp diameter
- 5° up x 8° backsweep
- Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
$200.00
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners.
- Stiff, precise, and width-optimized for enduro, trail and aggressive xc
- Carbon fiber perfection
- DESCENDANT geometry from their best enduro rider’s input
- Signature Troy Lee Designs style
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish.
- Aonodized, shot-peened finish
- Cold-drawn and butted proprietary AirAlloy aluminum tubing
- 4 degree upsweep
$184.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse…
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- Gold Standard of DH is now wider and stronger
- 820mm width for maximum control
$50.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
$75.00
Atmos is our new premium offering for cross-country performance. The Atmos 7k flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 30mm per side allowing you to customize the bar to your preferred width. This bar is made of lightweight 7050 aluminum.
- 760mm width
- 250g at full width
- 7050 aluminum
- Wide to start and trimmable by 30mm each side
SPECIFICATIONS
- Type: Flat
- Application: XC
- Clamp Diameter: 31.8mm
- Backsweep (degrees): 9
$89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more.
- Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy
- Material: MGR Super Six Alloy
- Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm)
- Diameter: 31.8mm
- Rise: 5mm / 15mm / 30mm / 50mm
- Length: 800mm (Adjustable to 740mm)
- Geometry: 4° up x 8° back
- Finish: Shotpeen anodized, decal logos
$41.99
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile
- Rock solid in the park or on the trail
- Cost effective upgrade to your cockpit without sacrificing quality
- Shot-peening and anodizing enhances fatigue life even further
- Material: Alloy
- Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm)
- Diameter (mm): 31.8
- Rise (mm):25 / 40 / 60
- Length (mm): 785
- Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm)
- Finish: Shotpeen anodized, laser logos
$172.00
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence.
- Bar Clamp Diameter: 35.0mm
- Color: Carbon
- Width: 760/800mm
- Rise: 10/20/40mm
- Back Sweep (deg): 8 degree
- Upsweep: 5 degree
- Material: Carbon
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$75.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead.
- Lightweight and strong 7050-T6 series aluminum alloy construction
- Signature 11° back sweep, 6° up sweep, 20mm rise
- 800mm and 750mm width options
- Graduated lines for easy trimming
- 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars
- Weight: 330g
- Note: Rustler bars are not compatible with bar ends
$179.99
- Intended use: XC and Trail
- Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform
- Manufactured from UD Carbon with matte clearcoat
- Requires 35mm bar clamp diameter stem
- 8 degree rearward sweep, 5 degree upward sweep
$129.99
- DH and Freeride, ultra-wide, 820mm wide handlebar
- Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Weight optimized and adjustable to 760mm
Features:
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design
- Material: Zirconium Doped 7-Series Alloy
- Weight: ±300g
- Diameter: 35mm
- Rise: 25mm
- Length: 820mm
- Geometry: 5° up x 8° back
- Finish: Shot peen anodized, decal logos
$219.95
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings.
- Uni-Directional carbon construction
- Ride-tuned to provide an ideal combination of stiffness and shock absorption
- Increased center section width for fine-tuned flex characteristics
- Downhill and twin crown fork compatible
- Permanent graphics, set-up grid and cut marks
$78.00
For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23-deg sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong, and durable, and great for long days bikepacking, touring, or shredding singletrack.
- Constructed using double-butted, AL-7050-T76 aluminum
- Bar sweeps forward, then back, to preserve stem length
- 5-deg upsweep allows adjustment to suit personal preference
- Bar can be flip-flopped to run up or down
- Graduated ends for easy trimming
- Bead-blast black finish
$94.95 - $110.45
- High strength 7 series Aluminium Alloy
- Shot peened for increased fatigue life
- Corrosion and abrasion resistant hard anodized finish
- Laser etched positioning grid for easy set up
- Width marks allow personalized fit adjustment
- Permanent Graphics
$69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses.
Spank Spoon: the best-priced handlebar on the market without compromise!
- Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality
- Freeride inspired all-mountain geometry makes the bar extremely versatile
- Shot-peening and anodizing enhances fatigue life
- Dial your fit—adjustable to 740mm
- Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
Page 1 of 3
Next page