Filter By:
Fat Bike & Plus Tires
$121.50
Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy.
- 120 TPI tubeless-ready casing
- Ramped center lugs for rolling efficiency
- Aggressively siping for grip
- Shovel-design side lugs for predictable braking and cornering
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss.
- Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$157.50 - $207.00
From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface.
- Deep, aggressive lugs dig into snow
- Tall side lugs provide cornering confidence
- 252 concave studs tear into slick surfaces
- Tubeless ready
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss
$112.50
Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control.
- 4.6” footprint
- Designed for optimal use as a front tire
- Aggressive side lugs comprised of soft rubber compound
- Ideally paired with Dunderbeist rear tire
$121.50 - $234.00
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability.
- Carbide studs grip ice
- Braced side lugs improve cornering
- Tubeless Ready
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$90.00 - $110.00
We named this tire for our friend Nate, who is also quite large and aggressive. This tire has a shred-your-face-off, run-over-anything, kung fu grip knobby tread pattern. The casing is round and supple. Tall, widely-spaced knobs are siped for added grip and compliance. The knobs’ wide spacing means they dig deep and still shed the crap you’re riding through. The tread wraps a little around the sides of the tire, providing good knob contour even on very wide rims, which in turn allows good off-camber traction. Similar to our beer preferences, Nate is available in black and tan.
- Folding bead
- Max pressure: 30psi
$115.00
Meet Edna: Surly's latest ultra-versatile fat bike tire. Edna was designed to perform admirably on a wide variety of terrains. Wanna go ride some super loose dirt or snow trails? Do it. Feel like riding over the pulverized bones of your enemies or, as some people call it, sand? Go for it. Hardpack? Lean back and let ‘er rip. Edna’s unique tread pattern has enough lug to provide bite on the loose stuff and a tight center tread that doesn’t drag on the hard. Add in a 4.3” footprint and you have enough traction and float to ride wherever and whenever you damn well please.
- Folding bead
- Casing: 60 TPI
- Max pressure: 30psi
- Weight: 1330g
$135.00
Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control.
- Braced side lugs for improved cornering
- Directional center lugs for rolling speed and braking traction
- Replacement studs and stud insertion tool sold separately
- Custom studdable up to 252 studs
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
- Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$112.50
Let Dunderbeist loose on your local groomed single track and feel the aggressive tread claw through the snow with unrivaled propulsion and braking traction. Its 4.6-inch footprint provides enhanced flotation and is compatible with a wide range of frames. Dual compound rubber rolls fast and keeps you in control while shredding the berms. Point uphill and feel the Dunderbeist dig in as you attack climbs covered in loose, unconsolidated snow. Pair Dunderbeist with its sibling front tire, Flowbeist, for the ultimate combination of traction and control.
- 4.6” footprint
- Designed for optimal use as a rear tire
- Aggressive side lugs comprised of soft rubber compound
- Ideally paired with Flowbeist front tire
$55.00
Whether you’re traveling on tarmac or trail, the beefy Super Moto-X offers you the best riding characteristics and plenty of comfort. Naturally, with the mark for fast e-bikes.
- Double Defense: The twin protector of High-Density Guard + SnakeSkin. More safety for light off-road tires is impossible.
- RaceGuard Protection
- Dual compound
- Wire Bead
$252.00
From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions.
- XL Concave Studs
- Deep lugs provide accelerating, braking, and cornering traction
- Open tread pattern sheds snow
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$270.00
Wrathlorde is an extreme-conditions fat bike tire designed for ultimate traction on challenging surfaces. Aggressive, tightly-spaced lugs decrease rolling resistance without compromising on traction, while 300 XL concave studs bite into ice for complete confidence.
- 120 TPI tubeless-ready casing
- Aggressive, tightly spaced center lugs with siping for a blend of rolling speed and traction
- Tall side lugs for traction in corners
- 300 XL Concave Studs for ultimate traction on ice
- Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$90.00
The Knard is a tire that just makes sense. With its tightly-spaced, low-block tread pattern, it provides the perfect ratio of traction and low rolling resistance. It grips well on all sorts of different surfaces and will haul some sausage on hardpack terrain or groomed trails. If you want a tire that has a little less bite and a bit more speed but don’t want to sacrifice traction, look no further. With sizes ranging from a svelte 41mm all the way up to a hefty 4.8”, there’s a Knard to solve all your fast-rolling needs.
- Folding bead
- Casing: 60 TPI
- Max pressure: 35psi
$145.00 - $180.00
Fat bike tire for the most extreme conditions.
- Optimized tread for deep mud and snow
- Extremely stable braking and traction edges in the middle area
- Long leading edges in transition and shoulder areas for more controlled steering response
- Evolution line, with Super Ground construction
- Addix SpeedGrip compound
- ECE: E-25
- 1700g
Note: this tire is not studded but has spike ready blocks.
$94.00
The Knard is a tire that just makes sense. With its tightly-spaced, low-block tread pattern, it provides the perfect ratio of traction and low rolling resistance. It grips well on all sorts of different surfaces and will haul some sausage on hardpack terrain or groomed trails. If you want a tire that has a little less bite and a bit more speed but don’t want to sacrifice traction, look no further. With sizes ranging from a svelte 41mm all the way up to a hefty 4.8”, there’s a Knard to solve all your fast-rolling needs.
- Folding bead
- Casing: 60 TPI
- Max pressure: 35psi
- Weight: 1170g
$92.00
The cross-country rocket combines speed and cornering control at the highest possible level. An excellent all-rounder for racetracks. Ultralight with 127-EPI-Evo-carcass. Tread design: Balanced proportion between stable studs and sufficient gaps for excellent rolling characteristics and amazing self-cleaning properties. 27.5+ versions with additional stud rows.
- Addix Speedgrip: The universal compound. It definitely has the widest range of use. Perfect for XC, AM, and Trail: for the majority of EVO tires there’s a version with ADDIX Speedgrip! It replaces the previous PaceStar compound where a significant, though not the only difference, during extensive use is more mileage and a longer life.
- Addix Speed is the compound for XC race specialists. There’s only one thing that ADDIX Speed really loves and that’s speed. So the rolling resistance has been chopped yet again. It’s lower than the previous PaceStar, but at the same time, ADDIX Speed is more durable and more resilient.
- SnakeSkin: The monofile SnakeSkin fabric on the sidewall makes the tubeless conversion for the MTB extremely easy and safe. It also provides the best cut protection on the side wall.
- LiteSkin: The lightest option. LiteSkin MTB tires forego SnakeSkin but still have high-pressure resistant tire beads. If you don't mind the extra effort, these tires can also be converted to Tubeless by using a liquid sealant.
$84.95
For Kenda's first foray into fat tires, we looked at our fattest off road tires—motorcycle. Inspired by the championship winning Millville 2 tire for grip in any environment and featuring multiple sizes with tread heights optimized for maximum performance. The Juggernaut is an unstoppable force, is there more we need to say?
- Sub 900 gram weight for the Pro 26x4.00
- Large casing for better flotation in snow
- Front and Rear application
$94.00
Our family of Dirt Wizards is highly-focused – one might even say spellbound – on providing traction and control on the kinds of surfaces where nary traction nor control are to be found. Its tread is comprised of a dual row of aggressive, trail-gobbling, beveled knobs in the center and well-spaced, siped knobs to dig into loose corners. Designed to work on 50mm rims, Dirt Wizards are tall and wide, providing next-level traction and cushioning. The casings have been designed to be flexible and responsive, yet durable and supportive. Minimum rim size for these naughty little wizards is a 35mm outer rim width.
- Folding bead
- Casing: 60 TPI
$78.00 - $90.00
Our family of Dirt Wizards is highly-focused – one might even say spellbound – on providing traction and control on the kinds of surfaces where nary traction nor control are to be found. Its tread is comprised of a dual row of aggressive, trail-gobbling, beveled knobs in the center and well-spaced, siped knobs to dig into loose corners. Designed to work on 50mm rims, Dirt Wizards are tall and wide, providing next-level traction and cushioning. The casings have been designed to be flexible and responsive, yet durable and supportive. Minimum rim size for these naughty little wizards is a 35mm outer rim width.
- Folding bead
$120.00
This is Bud, a front-specific 4.8" tire designed for 559mm (“26 inch”) rims. While our 100mm Clown Shoe Rims will offer the most ground contact and the best shape profile, Bud (and his brother, Lou) will also work on rims down to 65mm wide. Bud’s aggressive mud- and snow-shedding tread is characterized by tall (7mm), siped knobs, arranged in a pattern ideal for the unique requirements of steering and braking. A supple, durable 120tpi casing with folding Kevlar bead conforms well to ground surfaces of all types.
- Folding bead
- Casing: 120 TPI
- Max pressure: 30psi
- Weight: 1600g
$55.99
- Well-spaced and siped lugs help keep rolling resistance at a minimum even while running low air pressure
- Large siping of lugs provides additional grip in sand, snow, and other unfavorable conditions
- Staggered corner lugs provide a stable and predictable turning platform
- Available in 120 TPI for a supple, obstacle conforming tire, or 30 TPI for a durable yet forgiving casing
$125.00
Lou is the 26 x 4.8" rear-specific mate to Bud. Lou’s tread is much like Bud’s with tall knobs designed to grind, crawl, and claw its way over rooty, rocky, wet, muddy, loose, or otherwise inhospitable terrain. Lou’s tread pattern is a bit different, however, made for stability while both braking and accelerating. Its casing is durable, thin-walled, 120tpi which conforms well to the ground surface shape.
- Folding Kevlar bead
- Tubeless Ready
Page 1 of 1