Racks
$41.99
All-alloy bike rack securely mounts to bike to hold up to 40 lb.
Features
- Secure: Triangulated design holds cargo
- Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible
- Construction: Lightweight aluminum with stainless steel hardware
- Weight: 1.53 lbs / 694 grams
- Max Weight: 40 lb / 18 kg
$57.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061 T6 alloy construction
- To be mounted on bikes with disc brakes
- 625g
- 55lb weight capacity
$99.00
You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case.
- Strong steel tubing
- Double ply bamboo deck
- Deck measures: 140 x 381 mm (5.5 x 15")
- Height: 368 mm (14.5")
- Weight: 1360 g (3 lbs)
- Rated to 35 kgs (77 lbs)
$44.99
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light rack. It's got plenty of capacity for those key items on your journey. This model is designed to fit bikes with disc brakes.
- Fits bikes with disc brakes: offset with integrated spacer
- W-bend stays keep pannier hooks in place
- Holds up to 40 lbs. of cargo
- Top platform dimensions are 310mm x 112mm
$88.00
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle.
- Rack mount fits seatposts with diameters 22.0 - 31.6mm
- Rack deck measures 133 x 343mm (5.25 x 13.5")
- Total Rack length: 432 mm (17")
- Rack weight: .35kg (13 ounces)
- Rated to 5.34kg
- Lifetime PDWarranty
$140.00
Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.
$57.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061-T6 alloy construction
- Spring clip for additional cargo security
- 800g
- 55lb weight capacity
$168.00
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into.
Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
- Fits up to 29 x 3-inch tires, with room for fenders.
- Front or rear mountable.
- Works with all dropper posts.
- Made from 6061 aluminum the racks are lightweight, stiff, and strong.
- The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers.
- The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck.
- The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light.
- The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes.
- The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting.
- The Divide has a load capacity of 55lbs when eyelet mounted.
- For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs!
- Powder coated a sleek and refined shade of black.
- 960g including all hardware and extenders.
- Made in Taiwan.
- Lifetime warranty!
$120.00
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
$67.99
The Fairdale Adjust-A-Rack is a new take on the rear cargo rack. The rack is designed to be extremely easy to install. Fold the legs out, bolt them on to the bike and use the sliding adjustment to level the top of the rack. Unlike many other racks the Adjust-A-Rack requires no cutting or tedious resizing to make it fit.
$40.99 - $43.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket.
- Simple design for easy use
- Lightweight, yet sturdy
- Steel rack w/adjustable brake bolt mount
- Loading surface = 13" x 5"
- Lightweight at just over 2 pounds
$120.00
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately).
- Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing
- Fits 25.4 - 31.8mm handlebars (even fits between drop bars)
- Includes water resistant roll top bag that clips securely into basket
- Eyelet for attaching light mount
- Integrated u-lock carrying slot
- Rugged, lightweight 10 mm alloy tubes
- Rack weight: 500 grams
- Inside of basket dimensions: 155mm x 255mm x 105mm
- Lifetime PDWarranty
$8.99
Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets.
CONSTRUCTION
• Aluminum
ADDED BENEFIT
• Makes the Streamliner rack (sold separately) even more versatile
$64.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels
- Compatible with bike frames equipped with disc brakes
- Tubular aluminum rear rack for loaded touring
- MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets
- 6061 T-6 hollow aluminum
- 55lb weight capacity
- 680g
$100.00
The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation.
- Designed for frictionless compatibility with Haul ST and Haul LT.
- MIK accessory-compatible.
- T-channel rail construction.
- 20kg (44lb) load capacity. 30cm length, 32cm width
- Installation requires tools (not included).
$109.95
- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes
- Adjustable rack legs fit most 24" & 26" Fat bikes
- Integrated side bar provides a lower pannier attachment for more cargo on top of the rack
- The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market
- Not compatible with asymmetric rear stay design Fat bike frames
- Includes extra-long mounting bracket and rear light mount
- Max weight 55lbs
- 16.9 x 13.4 x 11.4"
- 2.79lbs
$37.95
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options.
- Fits tubes 20-60mm.
- Engineering grade polymer
- 64 mm mounting height adjustable
- Weight: 128g
- Max load: 3kg / 6.61lb
- Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Previous page
Page 2 of 2